Products

2100 Simulator

$1,135.00
2100 Simulator
  • SKU: G2100
  • Weight: 5.00 lb
  • Dimensions: 3.75" W x 9.00" H

The Guth Model 2100 was designed using a microcontroller, eliminating broad range mercury-in-glass thermostats. All components are chrome plated or stainless steel within the wet chamber area of the instrument.

Description

ALCOHOL BREATH TEST SIMULATOR
Digital Readout - Microprocessor Controlled

The Guth Model 2100 was designed using a microcontroller, eliminating broad range mercury-in-glass thermostats. All components are chrome plated or stainless steel within the wet chamber area of the instrument. The all metal top housing is chrome plated brass, preventing rust and corrosion and provides for uniform head space heating and mechanical security for all fasteners. The simulator utilizes a graduated laboratory glass container. The simulator has external fuse protection. The circuit boards have plug-in connectors. A Calibration Port is provided for verifying the temperature of the simulator. RS-232, 9600 Baud Digital Serial Output of temperature and instrument status (polled) when used in conjunction with bench top breath alcohol testers.

NHTSA APPROVED

RS-232, 9600 Baud Digital Serial output of temperature and instrument status (polled)

IDLE MODE SHUTDOWN - Heater and motor turned off, idle mode displayed, controlled via RS-232 port

About This Product

FEATURES

  • Delivery tube heated for ethanol temperature stability
  • Eight bit microprocessor control
  • High stability internal voltage reference
  • 12 bit digital accuracy from A/D converter
  • Internal AC power transformer with AC connections isolated
  • Software coded serial number
  • Visual indication of system operation during warm-up (dot scan)
  • Visual indication of heater activity via dot display
  • Visual indication of system malfunction (Malfunction is displayed as an error number)
  • Audible alarm indication of malfunction
  • RFI protected

SYSTEM SHUTDOWN UNDER THE FOLLOWING CONDITIONS

  • No solution in container
  • Motor stops
  • No output from shorted or open temperature sensor
  • No change in solution temperature after initial 15 min. start-up
  • Temperature of solution 34.2

General Specs

Construction Nickel Plated Brass w/ Matte Finish
Readout Bright LED Display
Sensor Electronic Solid State
Power Input 120 VAC, 60 cycle 220 - 240 VAC, 50 cycle
Power Consumption 72 Watts
Warranty

1 Year Parts + Labor

Size (h x w x d) 9 x 3.75 x 5 in
Weight 5 lb (1.634 kg)
Inlet Tube 3/4 in
Outlet Tube 3/4 in w/ Metal Female Sure Lock Connector

Electrical Specs

Domestic Power Input 105/120 VAC @ 50 Hz
Foreign Power Input: 220-240 VAC @ 60 Hz
External Safety Fuse Easy, accessible plug in 1.0 AMP Fuse
Power Switch Double pole mounted in top housing
Indicator Power Lamp n/a
Indicator Heat Lamp n/a
Temperature Controller Microcontroller
Immersion Heater Ground wire welded to heater housing for shock protection
 

Performance

Temperature Range 34.0°C ± .05°C
Recovery Time  
Laboratory Glass Container 500ml +/- 5% FIll mark molded into glass container
Secondary Baffle Available
Heated Head Space n/a
Heated Output Exhaust n/a
Warm Up Time  

Featured Products